Step 1

Lay walling as per manufacturers instructions.

Cover the area under the wall with a polythene sheet so any material falling can be re used.

Step 2

Cut the vacuum pack, empty contents into tub and aireate for 3 – 4 minutes.

Step 3

Using suitable gloves take a handful of Geo-Fix® and rub into joints ensuring that the material is pressed firmly into the joints working an area of approx 4 – 5 sq mtrs at a time. Any material falling onto the polythene sheet below can be re used.

Step 4

When 4 –5 mtrs of jointing has been completed simply sweep off excess with a soft brush working at a 45 deg angle to the joints to ensure that no material is swept out of the joint.

Step 5

Protect the material from rain until cured.